Downloading Images From The Camera - Ftp Server Menu; Setting The Alarm Output - Alarm Output Menu; Alarm Out 1, 2 Tab; Ftp Server Function - Sony Ipela SNC-CH140 User Manual

Downloading Images
from the Camera
server Menu
FTP server
When you click
the FTP server menu appears. This menu allows you to
search image and audio files stored in the built-in
memory (approximately 8 MB) or CF memory card (not
supplied. Applicable for SNC-CH140 only) inserted in
the camera, or configure the FTP server function for
downloading, using the FTP client software on the
computer.

FTP server function

To activate the FTP server function, select On.
x SNC-CH140
Selected root directory
Select the memory that contains the file you want to
download.
The current memory space is displayed on the right.
Built-in memory: Built-in memory of this camera
CF memory card: CF memory card inserted into the
CF card slot of the camera
x SNC-DH140
Built-in memory
The current memory space of the built-in memory is
displayed.
Note
The frame rate and operability on the main viewer may
be reduced when you logged in to the FTP server of this
unit using the FTP client software installed in the
computer.
OK/Cancel
See "Buttons common to every menu" on page 26.
68
Downloading Images from the Camera — FTP server Menu
— FTP
in the Administrator menu,
Setting the Alarm Output
— Alarm output Menu
When you click Alarm output
menu, the Alarm output menu appears.
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the camera
linked to alarm detection, the timer and the Day/Night
function.
The Alarm output menu consists of two tabs:
Alarm out 1 and Alarm out 2.
Tip
For details on connection of peripheral devices to the
alarm output of the I/O port, refer to the supplied
Installation Manual.

Alarm out 1, 2 Tab

Alarm output
To activate the alarm output function, select On.
Mode
Select the mode of the alarm output function.
Alarm: Controls alarm output by synchronizing it with
an external sensor input or the built-in motion
detection function.
When Alarm is selected, the items Sensor input 1,
Camera tampering detection, VMF, Motion
detection, Alarm duration and Effective period
become active.
Timer: Controls alarm output using the timer.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 72)
Day/Night: Controls the alarm output linked to the day/
night function.
Sensor input 1
Select this option when you link the alarm output to an
external sensor that is connected to sensor input of the
camera I/O port.
in the Administrator