Operation Panel (Front) <Rc-D710 + Pg-5J - Kenwood RC-D10 Instruction Manual

OPERATION PANEl (FRONT) <RC-D710 + PG-5J>
n IN NORMAlMODE
q Tuning Control
Press [F], then press the Tuning control to enter Menu mode.
w F
Press [F] to enter Function mode.
e TNC
Each time you press [TNC], the mode toggles between APRS (or NAVITRA)
mode ON and PACKET mode ON.
• When "OPENING TNC" appears on the display, the mode cannot be changed.
r PM
Press [PM] to enters the PM (Programmable Memory) channel selection
mode.
t
Press [ ]
to turn the RC-D10 power ON and OFF.
Note: For [MSG], [LIST], [BCON], [POS], and [P.MON] keys, refer to the APRS explanation.
12