Page 1
GNF 20/35 Titel Euro Vorders. Seite 1 Dienstag, 15. Mai 2001 12:33 12 Bedienungsanleitung Operating Instructions Instructions d’emploi Instrucciones de servicio Manual de instruções Istruzioni d’uso Gebruiksaanwijzing Betjeningsvejledning GNF 20 CA Bruksanvisning Brukerveiledningen GNF 35 CA Käyttöohje Oδηγία ειρισµ ύ Kullanım kılavuzu Deutsch English Français Español Português Italiano Nederlands Dansk...
Before using for the first time, ask for a practical demon- 8 On/Off switch stration. 9 Service indicator (GNF 35 CA) If the mains cable is damaged or 10 Vacuum hose* cut through while working, do not 11 Vacuuming connection piece touch the cable but immediately pull the mains plug.
Never allow children to use the machine. without any load. Do not use any diamond cut- ting discs that are damaged, out-of-balance, or Bosch is only able to ensure perfect function- vibrate. ing of the machine if the original accessories intended for it are used.
Page 8
Mounting the clamping assembly Changing the Tool Place the mounting flange 15 onto the tool spin- dle 14. The mounting flange 15 with its driving Before any work on the machine itself, pull feature must be properly seated on the tool spin- the mains plug.
The machine can be plugged directly into the re- Switching on and off ceptacle of a Bosch general-purpose vac with re- mote starting control. The vac starts automati- Switching on: Slide the On/Off switch 8 cally when the machine is switched on.
Page 10
Do not brake coasting cutting disks with side Operating Instructions pressure. Caution! Diamond cutting discs become Wear protective goggles, ear very hot during operation; do not touch protection and a dust protection them before they have cooled down. mask. Wear protective gloves sturdy shoes.
In case of complaint please send the machine, Maintenance and Cleaning undismantled, to your dealer or the Bosch Serv- ice Centre for electric power tools. Before any work on the machine itself, pull the mains plug.