Search For Program Type (Function Of Type M/Type M2); Set Station Name (Function Of Type X); Frequency Step Setting (Function Of Type X) - Kenwood DDX5034M Instruction Manual

Radio Listening
Search for Program Type
(Function of Type M/Type M2)
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1 Enter Program Type mode
2 Select a Program Type
1
2
2
1 Program Type is displayed. Touch to select a
Program Type.
2 Scrolls the Program Type list.
3 Searches for the program type.
It is displayed when the Program type is
selected.
4 Returns to the previous screen.
3 Search a station of the selected Program
Type
30 DDX5034/DDX5034M
Set Station Name
(Function of Type X)
Assigns a name to a station.
1
2
3
3
4
4
Frequency Step Setting
(Function of Type X)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 Hz.
1
⁄
• When the same operation is repeated, the frequency step
returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
Tune in to the station to name
Start Name set
Enter the name
See <Character Entry> (page 43) for
information on how to enter a name.
End Name set
Switch the frequency step
While pressing [NAV] button and [0] button,
press the Reset button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.