Sharp Aquos LC-42D~43U Operation Manual page 10

QUICK REFERENCE
Ventilation & Cleaning Tips
Keep your AQUaS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUaS television is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth (supplied) with water to lightly moisten. Gently
~ ~,;c
. .
' < ,
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do
D-
l~
not use liquid or aerosol cleaners. -
The screen is glass and can be scratched or broken when dropped or impacted.
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUaS television for stability.
• Lift onto installation location as the diagram illustrates.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUaS
television. (See page 13.)
Connect the AC plug for the AQUaS television
into the AC outlet.
W ' - - - ·
: I__
t.
..
,
.~
..
.
.
...-,
,, __
~
.•• o
-
-
- -
~
~
'------l,'r---c::::J3
"lAC
outlet
I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
How to turn on the AQUaS television for the
first time.
A) Press
POWER
on the AQUaS television.
, _ _
~_VO_l
_+
_c:::::::J_V_CH_A_ _
9_UT_ _
~_rnl_
POWER
B) The paWER indicator on the front of the
AQUaS television lights GREEN.
,J
POWER SlEEP OPe
o
0
eI
0 0
BED
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
_-I-----=::=:J~
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with cable clamps and a cable tie.
Ferrite core
POWER indicator
BED
• Speakers cannot be detached from the 1V.
• 1V angle cannot be adjusted.
@-8
QUICK REFERENCE
Ventilation & Cleaning Tips
Keep your AQUaS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUaS television is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth (supplied) with water to lightly moisten. Gently
~ ~,;c
. .
' < ,
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do
D-
l~
not use liquid or aerosol cleaners. -
The screen is glass and can be scratched or broken when dropped or impacted.
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUaS television for stability.
• Lift onto installation location as the diagram illustrates.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUaS
television. (See page 13.)
Connect the AC plug for the AQUaS television
into the AC outlet.
W ' - - - ·
: I__
t.
..
,
.~
..
.
.
...-,
,, __
~
.•• o
-
-
- -
~
~
'------l,'r---c::::J3
"lAC
outlet
I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
How to turn on the AQUaS television for the
first time.
A) Press
POWER
on the AQUaS television.
, _ _
~_VO_l
_+
_c:::::::J_V_CH_A_ _
9_UT_ _
~_rnl_
POWER
B) The paWER indicator on the front of the
AQUaS television lights GREEN.
,J
POWER SlEEP OPe
o
0
eI
0 0
BED
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
_-I-----=::=:J~
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with cable clamps and a cable tie.
Ferrite core
POWER indicator
BED
• Speakers cannot be detached from the 1V.
• 1V angle cannot be adjusted.
@-8