Auto Registration Error Code List - Sony KP-43T70K Service Manual

3-11. AUTO REGISTRATION ERROR CODE LIST

[ERROR CODE LIST]
ERROR
DISCRIPTION
CODE
00 No Error
10 Sensor Output Level Low
20 Sensor Output Level High
30 Adjustment Loop Counter Overflow
40 Regi Data Overflow
50 Regi Data Overflow
60 Offset Overflow
70 Offset Overdrow
* In case of multiple error, last error is displayed.
• ERROR CODE SCREEN DISPLAY
E 11 B
* Error code will be displayed on center of screen for 3 seconds.
• ERROR CODE DISPLAY IN REGI SERVICE MODE
PJE 2 9
ERR
KP-43T70K/43T70T/48VS70K/53VS70K/53VS70T
* Check wiring, beam position, sensor.
* Check OP-amp circuit.
* Check the data go far from the standard or not.
* Check the data go far from the standard or not.
* Check the data go far from the standard or not.
* Check the data go far from the standard or not.
* Check the data go far from the standard or not.
E 11 B
1 4 0
ITEM NUMBER-29
SENSOR NUMBER
(ONLY "10"or "20")
ERROR CODE 40
G-0 (Blank)
R.G.B R-1
B-2
RM-Y906K RM-Y906 RM-Y906K
NOTE
1
R. G. B
SENSOR NUMBER
ERROR CODE 10
ERROR
– 37 –
RM-Y906K
0 : Upper Center
1 : Middle Left
2 : Middle Right
3 : Lower Center
0 : Upper Center
1 : Middle Left
2 : Middle Right
3 : Lower Center
[SENSOR POSITION]
0
SCREEN
3
0 : UPPER SENSOR
1 : LEFT SENSOR
2 : RIGHT SENSOR
3 : LOWER SENSOR
RM-Y906
2