Pictbridge / Cp Direct / Bubble Jet Direct - Canon EOS 5D Instruction Manual

t(
PictBridge
~CP
Direct
[!j
Bubble Jet Direct
Preparing to Print
Playback the image.
Press the
< [E] >
button.
The image and the printer icon
<
t(
>,
<~>,
or <[!j> indicating a printer
connection will be displayed.
The
<
~
>
button lamp will light in
blue.
The procedure will be different
depending on the icon displayed. See
the applicable pages below.
126 - 129,138
130 -132,138
133 - 135,138
RAW images are not compatible with direct printing.
If you use a battery to power the camera, make sure it is fully charged.
During direct printing, keep checking the battery level.
If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what's wrong, do the following:
Press the <
CEI
> button to playback the image and follow the steps
below.
1. Press
<§>.
2. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. See "Error
Messages" on page 129.
{1ft
Before.disconnecting the cable,turn off the camera and printer. Pullout
the cable while holding the plug, not the cord.
;@}
When connecting the camera to the printer,do not use any cable other
than the dedicated interface cable.
Do not disconnect the cabl.e during direct printing.
125
I