Mitsubishi Electric Pedion Owner's Handbook Manual page 54

3. When the slot's eject button pops out, fold it
back into its recess on the side of the Pedion.
The two eject buttons fold in different
directions.
4. Connect any necessary cable to the PC Card.
5. Configure the PC Card software.
To remove a PC Card
1. Follow the procedure for terminating card
operations under Windows.
2. Fold the slot's eject button out of its recess, then
push it firmly.
1
2
3. Pull the PC Card completely out of the slot.
The PC Card may become hot. This is normal and
not a problem.
C o n n e c t i n g o p t i o n a l d e v i c e s
OWNER'S HANDBOOK
2
1
5 / 3