System Setup Screen-1
Select the AV-IN2 input display
Selecting the display when this device is switched
to internal AV-IN2 terminal input source.
Touch the [Video 2] or [R-Cam] button.
Setting the Rear view camera image [Mirror]:
(AV-IN2 setting during "R-Cam")
Touch
Setting
[7On]
The image which appeares in
the camera is turned left-side
right and displayed.
[7Off ]
The image which appeares in
the camera is displayed as it is.
Touch Sensor Tone [BEEP]
Setting the operation check sound (beep sound)
ON/OFF.
Touch
Setting
[7On]
Touch sensor tone is turned on.
[7Off ]
Touch sensor tone is turned off.
Switching the Setup Screen-2
Touch the [ 3 ] button.
Exit the System Setup Screen-1
Touch the [Return] button.
Return to the setup menu screen.
10
|
English
System Setup Screen-2
Setting the AV Output [AV-OUT]
Touch
Setting
[7Normal]
Picture/sound with monitor
picture.
[7Video 1]/
Picture/sound from AV-IN1
[7NAV]
terminal.
[7Video 2]/
Picture/sound from AV-IN2
[7R-Cam]
terminal.
[7TV]
Picture/sound from television.
(During the KTC-V500N,
KTC-V500P or KTC-V500E is
connected)
Switching the Setup Screen-1
Touch the [ 2 ] button.
Exit the System Setup Screen-2
Touch the [Return] button.
Return to the setup menu screen.