Table of Contents
Advertisement
"NTSC = PAL" Setting
(Except for the U.S.A. and Canada)
This setting makes it possible to play an NTSC-format
disc by converting signal into PAL format. Select "On"
when it is required to convert NTSC-format discs into
PAL signals.
Setting items
"
" : Select to return to the previous screen.
"On" : Select to enable conversion from NTSC to
PAL.
"Off" : Select to disable conversion from NTSC to
PAL.
38
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
tilt the joystick up or down to display the "VISUAL"
menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
In the setup menu, select "NTSC = PAL" by tilting
4.
the joystick up or down and press
Player Menu Language
7
Disc Menu Language
7
On
Audio Language
7
Off
Subtitle Language
Still Mode
FL Mode
NTSC = PAL
SCART Output Select
5.
Select "On" or "Off" by tilting the joystick up or
down, then press
to enter the selection in
ENTER
memory.
"SCART Output Select" Setting
(For Europe and U.K.)
This setting makes it possible to select the output
signals from the TV SCART connector of the player.
(The VCR SCART connector always outputs composite
video signals so its output signals cannot be selected.)
1
and
When the "RGB" output signals are selected with this
SET UP
setting, the COMPONENT VIDEO OUTPUT jacks of
the player do not output any video signal.
At the factory, the TV SCART connector output signals
of the player has been set to "Composite".
Setting items
"
" : Select to return to the previous screen.
.
"Composite" : Select to output composite video
ENTER
signal.
"S Video" : Select to output S Video signals.
"RGB" : Select to output RGB signals.
Chapter 2: Various Setups
Advertisement
Table of Contents
