Security Indicator Setup; Setup Memory; [Setup Memory]; [Security] - Kenwood DDX6046BT Instruction Manual

Setup Menu

Security Indicator Setup

Setting the security indicator to ON helps to
protect your receiver system against theft.
1 Display the Security screen
>
Touch [ ] [
(page 62)
[SI] Turns the SI function on or off.
If turned "ON", the security indicator on the
front panel flashes when the vehicle ignition is
off. ( "ON")
66 DNX SERIES DNX6960/DNX6160/DNX6020EX/DNX6460BT/DNX5160
> >
] [System]

[Security].

Setup Memory

Audio Control, AV-IN SETUP, AV Interface,
Navigation, and Audio SETUP settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
1 Display the SETUP Memory screen
>
Touch [ ] [ ]
Memory]. (page 62)
2 Start Setup Memory
[Lock] Locks the AV-IN SETUP, Navigation,
and Audio SETUP settings. When [Lock] is
selected, you cannot change the AV-IN SETUP,
Navigation, and Audio SETUP settings.
[Yes] Memorizes or recalls the settings.
[No] To cancel the function, touch [No]. To
cancel memorization, touch [No].
The SETUP Menu screen appears again.
3 Select a desired function
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear] Clears the currently memorized
settings.
> >
[System] [SETUP