Usb Data Cable - Nokia 6280 User Manual

Synchronize from a server
To use a remote Internet server, you must subscribe to a synchronization service.
For more information and the settings required for this service, contact your
service provider. You may receive the settings as a configuration message. See
Configuration settings service p. 14 and Configuration p. 93.
If you have saved data on the remote Internet server, to synchronize your phone,
start the synchronization from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server synchronisation.
Depending on the settings, select Initialising synchronisation or Initialising copy.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete, if the contacts or calendar are full.

USB data cable

You can use the USB data cable to transfer data between the memory card
inserted in the phone and a compatible PC or a printer supporting PictBridge. You
can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing, connect the USB
data cable; when the phone displays USB data cable connected. Select mode.,
select OK. Select from the following modes:
Default mode — to use the cable for PC Suite
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Default mode, Printing, or Data storage.
Copyright © 2005 Nokia. All rights 90