Speaker Level Setting - Kenwood DVR-5070 Operation Manual

Speaker level setting

For this unit, the speaker levels have been set in advance so that the best volume balance is obtained with
standard use.
Reset as follows to match your listening environment.
1 Play a disc marked "Dolby Digi-
tal".
2 Stop the playback.
3 Press TEST key for more than 2
seconds
4 Press the TRIM (5/∞) keys to con-
trol the speaker level.
÷ Press TEST (SOUND/NIGHT) key
to resume nomal mode.
¡
SELECT
AUTO/MONO
SOUND
/NIGHT
TEST
TRIM
The test tone is played back from the Left Front speaker.
Adjust the VOLUME CONTROL so that it is slightly loud
and fix it there.
The speakers will be switched as follows in intervals of
about 2 seconds.
L C R
Adjust the volume with the TRIM (5/∞) keys while the
indicator is flashing so that the volume from all speakers
except the subwoofer (SW) appears the same.
÷ The level of Front speakers, Center speaker and Surround
speakers adjustment are possible in the range from -6
dB to +6 dB.
The level of Subwoofer adjustment is possible in the
range from -9 dB to +9 dB.
Note Note
As the subwoofer (SW) has a special playback band, nor-
mal adjustment is not possible with the test tone. Please
adjust the subwoofer while listening to actual music. (i)
DVR-5070 (EN)
"L" Blinks.
RS LS SW
47