Protecting The Environment; Ec Declaration Of Conformity - Black & Decker KS880EC TYPE 2 Original Instructions Manual

Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new plug.
u
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
z
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Input voltage
Power input
Number of strokes min
Stroke length
Max. depth of cut
Wood
Steel
Plastic pipe
Weight
Level of sound pressure according to EN 60745:
Sound pressure (L ) 84 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 95 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Cutting wood (a ) 17.1 m/s , uncertainty (K) 2.5 m/s
2
h, cw
Cutting sheet metal (a ) 10.3 m/s
2
h, cm

EC declaration of conformity

MACHINERY DIRECTIVE
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC , EN 60745-1, EN 60745-2-11
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
_
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
KS880EC TYPE 2
V 230
AC
W 400
0 - 4,600
-1
mm 10
mm
100
3
ø 50
kg 1.9
2
, uncertainty (K) 2.4 m/s
2
%
KS880EC
Kevin Hewitt
Vice-President Global Engineering
Berkshire, SL1 3YD
United Kingdom
20-01-2010
7