Fujitsu Heat pump, split, single service Operation Manual page 7

Heat pump, split, single service
Ref.
Function
5
Selecting the heating mode
6 Information display
7
Confirm "OK"
8 Selecting cooling mode
9
RESET button
(Hold down the "RESET" key for 3 seconds).
10
Selecting the heating mode
11
Digital display
12
Control knob
13 Occupancy key
Instruction manual "1353-EN"
- Definitions
- Heating operating according to the heating programme
(Summer/winter mode switchover is automatic).
- Constant comfort temperature.
- Constant reduced temperature.
- Stand-by mode with anti-frost protection (Provided that the
heat pump's electrical power supply is not interrupted).
- Various data (please see page 15).
- Reading error codes.
- Information concerning maintenance, special mode.
- Input into the selected menu.
- Confirmation of the parameter settings.
- Confirmation of the adjustment to the comfort temp. setting.
- If the installation is fitted with the cooling kit:
- Cooling operating according to the heating programme
(Summer/winter mode switchover is automatic).
- Reinitialising the parameters and cancelling error messages.
Do not use during normal operation.
- Heating operating according to the heating programme
(Summer/winter mode switchover is automatic).
- Constant comfort temperature.
- Constant reduced temperature.
- Stand-by mode with anti-frost protection (Provided that the
heat pump's electrical power supply is not interrupted).
- Operating control. Readout of the current temperature, of the
heating mode and of any faults
- Adjusting the ambient temperature setpoint
- Comfort / Reduced switchover
.
7