Panasonic CR-CM120U Operating Instructions

WMA MP3 CD Player/Receiver with CD Changer Control
Receiver with Microphone Ready
Model:

Operating Instructions

¡Please read these instructions (including "Limited Warranty" and "Customer Services Directory") carefully before using this product
and keep this manual for future reference.

Safety Information

■
Read the operating instructions for the unit and all other compo-
CQ-C1401U
nents of your car audio system carefully before using the system.
They contain instructions about how to use the system in a safe and
effective manner. Panasonic assumes no responsibility for any prob-
lems resulting from failure to observe the instructions given in this
manual.
CR-CM120U
This pictograph intends to alert you to the presence of
important operating instructions and installation
instructions. Failure to heed the instructions may
Warning
result in severe injury or death.
Warning
Observe the following warnings when using this
unit.
❑ The driver should neither watch the display nor operate
the system while driving.
Watching the display or operating the system will distract the driv-
er from looking ahead of the vehicle and can cause accidents.
Always stop the vehicle in a safe location and use the parking
brake before watching the display or operating the system.
❑ Use the proper power supply.
This product is designed for operation with a negative grounded
12 V DC battery system. Never operate this product with other bat-
tery systems, especially a 24 V DC battery system.
❑ Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the prod-
uct yourself. If the product needs to be repaired, consult your
dealer or an authorized Panasonic Servicenter.
❑ Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an abnormal
state (has foreign objects in it, is exposed to water, is smoking, or
smells), turn it off immediately and consult your dealer.
❑ Refer fuse replacement to qualified service personnel.
When the fuse blows out, eliminate the cause and have it replaced
with the fuse prescribed for this unit by a qualified service engi-
neer. Incorrect replacement of the fuse may lead to smoke, fire,
and damage to the product.
■
This manual uses pictographs to show you how to use the product
safely and to alert you to potential dangers resulting from improper Caution
connections and operations. The meanings of the pictographs are
Observe the following cautions when using this
explained below. It is important that you fully understand the mean-
ings of the pictographs in order to use this manual and the system
unit.
properly.
❑ Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic
conditions while driving.
This pictograph intends to alert you to the presence of
❑ This unit is designed for use exclusively in automo-
important operating instructions and installation instruc-
tions. Failure to heed the instructions may result in biles.
Caution
❑ Do not operate the unit for a prolonged period with the
injury or material damage.
engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
❑ Do not expose the unit to direct sunlight or excessive
heat.
Otherwise these will raise the interior temperature of the unit,
Observe the following warnings when installing.
and it may lead to smoke, fire, or other damage to the unit.
❑ Do not use the product where it is exposed to water,
❑ Disconnect the lead from the negative (–) battery termi-
moisture, or dust.
nal before installation.
Exposure of the unit to water, moisture, or dust may lead to
Wiring and installation with the negative (–) battery terminal con-
smoke, fire, or other damage to the unit. Make especially sure
nected may cause electrical shock and injury due to a short circuit.
that the unit does not get wet in car washes or on rainy days.
Some cars equipped with the electrical safety system have specific
❑ To prevent the microphone from howling, keep proper
procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE distance between the microphone and the speaker.
❑ Decrease the volume immediately whenever the howl-
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM
RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL
ing is generated.
INJURY OR DEATH.
Failure to heed this may damage your hearing and speakers.
❑ Never use safety-related components for installation,
Observe the following cautions when installing.
grounding, and other such functions.
❑ Refer wiring and installation to qualified service per-
Do not use safety-related vehicle components (fuel tank, brake,
suspension, steering wheel, pedals, airbag, etc.) for wiring or fix- sonnel.
ing the product or its accessories. Installation of this unit requires special skills and experience. For
❑ Installing the product on the air bag cover or in a location
maximum safety, have it installed by your dealer. Panasonic is
not liable for any problems resulting from your own installation
where it interferes with airbag operation is prohibited.
❑ Check for piping, gasoline tank, electric wiring, and other of the unit.
❑ Follow the instructions to install and wire the product.
items before installing the product.
Not following the instructions to properly install and wire the
If you need to open a hole in the vehicle chassis to attach or wire
product could cause an accident or fire.
the product, first check where the wire harness, gasoline tank, and
❑ Set the volume level to low enough before the AUX con-
electric wiring are located. Then open the hole from outside if pos-
nection is completed.
sible.
❑ Never install the product in a location where it interferes Failure to observe this, the loud noise may come out and dam-
age your speakers and your hearing. Direct connection of the
with your field of vision.
speaker/headphone output of an external device without any
❑ Never have the power cord branched to supply other
attenuator may distort sound or damage the connected external
equipment with power.
device.
❑ After installation and wiring, you should check the nor-
mal operation of other electrical equipment.
The continuation of their using in abnormal conditions may cause
fire, electrical shock or a traffic accident.
❑ In the case of installation to an airbag equipped car, con-
firm warnings and cautions of the vehicle manufacturer
before installation.
❑ Make sure the leads do not interfere with driving or get-
ting in and out of the vehicle.
❑ Insulate all exposed wires to prevent short circuiting.
❑ Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent them
from getting caught in the vehicle chassis, screws, and moving
parts such as seat rails. Do not scratch, pull, bend or twist the
leads. Do not run them near heat sources or place heavy objects
on them. If leads must be run over sharp metal edges, protect
the leads by winding them with vinyl tape or similar protection.
❑ Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools to
install the product. The use of parts other than those supplied or
designated may result in internal damage to the unit. Faulty
installation may lead to an accident, a malfunction or fire.
❑ Do not block the air vent or the cooling plate of the unit.
Blocking these parts will cause the interior of the unit to over-
heat and will result in fire or other damage.
❑ Do not install the product where it is exposed to strong
vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If the
installation is not stable, the unit may fall down while driving and
this can lead to an accident or injury.
❑ Installation Angle
The product should be installed in a horizontal position with the
front end up at a convenient angle, but not more than 30˚.
The user should bear in mind that in some areas there may be
restrictions on how and where this unit must be installed.
Consult your dealer for further details.
❑ Wear gloves for safety. Make sure that wiring is com-
pleted before installation.
❑ To prevent damage to the unit, do not connect the
power connector until the whole wiring is completed.
❑ Do not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
❑ The microphone input on this unit is only for specially
designated microphone unit.
The following applies only in the U.S.A.
Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifications to this equipment
would void the user's authority to operate this device.