Hinge (40) Assembly - Sony DCR-TRV33 Service Manual

DCR-TRV33/TRV33E

2-9. HINGE (40) ASSEMBLY

2
Rotate to the "A" marked portion
2
Screw
1
counterclockwise by 90 degrees
(M1.7 × 4),
lock ace, p2
Rotate the "B" marked portion
3
counterclockwise by 90 degrees
in the direction of the arrow
A
8 Remove the FP-626 flexible board
3
B
3
9 Harness (PV-140)
Caution
Rotation of the LCD panel has limitation due to its hinge
in this model. Excessive force to rotate the LCD panel
damages the hinge.
(Refer to "Caution"of 2.1 P cabinet assembly.)
Caution
If the FP-626 flexible board is removed once, the
adhesion strength of a double-sided tape decreases.
Use the new FP-626 flexible board at the time of an
assembly.
that is attached by the doble-sided tape
Dowel for setting
the position
4 Three claws
5 Hinge cover (C) (40)
q; Hinge (40) assembly
Remove the Harness (PV-140) in the direction
of the arrow
Bend the Harness (PV-140) along with connector
2-10
7 Hinge cover (M) (40)
6 Screw
(M1.7 × 4),
lock ace, p2
Hinge (40) assembly