Table of Contents
Advertisement
4. Fitting the front panel
Mounting brackets are already fitted on
stainless steel door fronts. These fronts
cannot be shortened. (Go to "Fitting
and securing the door front".)
The door of a kitchen base unit (without
drawer front or fittings) is normally used
for the front panel.
If a kitchen door front is not available, a
panel with the following dimensions
may be used:
Width:
23 1/4" - 23 1/2"
(590 - 597 mm)
Thickness:
the same thickness as the adjacent
front panels, but at least 2/3" (16 mm).
Height:
Dimension X
Fitting the mounting bracket
A mounting bracket must be fitted to
the rear of the front panel.
Templates are provided to position the
mounting bracket and the front panel
correctly.
^ Place a template on each end of the
bracket as shown, making sure the
rule marks face the outside of the
bracket.
Installation
11
Hide quick links:
Advertisement
Table of Contents
