Kenwood CD Player DP-SE7 Instruction Manual page 19

Muting the sound temporarily
MUTE
Remote control unit
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is adjusted.
Bass and treble compensation
N.B.
The indication changes each time this key is
pressed.
1NB ON1...The high and the low range are
compensated according to the vol-
ume (effective for low volumes).
2NB ON2...The high and the low range are
compensated independent of the
volume.
3NB OFF
When CD has been selected.
C D
V O L
(Remote control unit only)
Blinks R-SE7
MUTE
(N.B.: Natural Bass circuit)
R-SE7 Lights
NB
R-SE7
Volume display R-SE7
2 )
Listening through headphones
1 Insert the headphone plug into the phones jack.
phones
÷ Headphones with a stereo mini plug can be connected.
÷ The sounds from all speakers are cut off.
2 Adjust the volume.
volume
control
∞
down
AUTO POWER SAVE function
When the power is ON and neither recording nor
playback is executed for 30 minutes or more, the
power is switched off automatically by this func-
tion. This function can be made active or not active
by the following operation.
Press when the power is OFF.
Each press switches the modes as follows.
1APS ON..... Auto power save is used.
2APS OFF.... Auto power save is not used.
÷ When the TUNER input is selected, it is available only
when the volume is set to 0.
Power Switch Standby
When this system is in standby condition (time display
for the R-SE7, STANDBY indication for DP-SE7, standby
indicator lit for X-SE7), a slight current flows for memory
protection.
At this time also, the remote control can be used for
power ON.
19
Hearing sound
R-SE7/DP-SE7/X-SE7 (En)
A
pure
∞
up
pure