Epson PS-100 Series User Manual page 21

Pairing issues
<When using the product for the first time>
Check
1 Attach the PS-100 to the cradle to cancel the battery protection mode.
2
Enable Bluetooth
3 To check smart device compatibility follow this link
4 Ensure your smart device is connected to the Internet.
5
Remove any other PULSENSE product that could interfere with the Bluetooth
communication.
<When pairing is lost or the PS-100 has been paired with another smart device>
Check
1 Has the PS-100 already been un-paired?
If not, attach the PS-100 to the charging cradle and attached the cradle to a power supply.
Tap the screen continuously until the blue lights flash. This will delete the current
Bluetooth settings on the device.
2 Has the PS-100 already been deleted from PULSENSE View?
Delete the PS-100 from the pairing menu in PULSENE View
3 Has the PS-100 already been deleted in the Bluetooth® settings of your smart device?
Delete the PS-100 from the Bluetooth
4
Has Bluetooth
5 To check smart device compatibility follow this link
6 Ensure your smart device is connected to the Internet.
7 Remove any other PULSENSE product that could interfere with the Bluetooth
communication.
®
communication on your smart device.
®
®
communication been enabled on your smart device?
What
www.epson.eu/pulsense
What
menu in smart device
www.epson.eu/pulsense
Set up and Basic Operation  21
®
®