Installation Tab - Sony Ipela SNC-CH135 User Manual

Logo
On: Select an image file you want to use for Logo by
using the Browse... button, and click Upload to
upload the file.
Supported image file format: gif89a format (GIF
animation and transparent GIF format are not
supported.)
Maximum image size: 640 × 120
Number of horizontal pixels: An even number
Maximum file size: Approximately 50 KB
Off: You can set Text in Camera ID's box.
Notes
• Both Text and Logo cannot be used at the same time.
• If the image size of the logo is larger than the image,
it cannot be displayed.
Superimpose format
Click Edit to edit the content to superimpose over each
display position.
Only one Date and one Camera ID can be specified for
the Superimpose format.
You can set the content to superimpose in the "Lower
left", "Lower right", "Upper left", "Upper right",
"Center", "Top" and "Bottom" parts, respectively.
However, if you specify the "Top", superimposed
content will not appear on the upper left or upper right.
Similarly, if you specify "Bottom", superimposed
content will not appear on the lower left or lower right.
If the Lower left/Lower right or Upper left/Upper
right are displayed at the same time, the maximum
image size that can be used for a logo is 624 × 120.
Click Date & Time, Camera ID, Codec, Zoom,
Camera direction or Event to insert the corresponding
tag into the string.
Display sample: Lower left
OK/Cancel
See "Buttons common to every menu" on page 33.
38
Configuring the System — System Menu

Installation Tab

You can perform settings related to installation.
Display sample: SNC-CH240
Maximum image size
SNC-CH135/CH140/CH180/DH140/DH180
1280 × 720: Image will have an aspect ratio of 16:9, and
an image size up to 1280 × 720 can be specified for
the video codec.
1280 × 1024: Image will have an aspect ratio of 5:4, and
an image size up to 1280 × 1024 can be specified for
the video codec.
SNC-CH240/DH240/CH280/DH280
1920 × 1080: Image will have an aspect ratio of 16:9,
and an image size up to 1920 × 1080 can be specified
for the video codec.
1920 × 1440: Image will have an aspect ratio of 4:3, and
an image size up to 1920 × 1440 can be specified for
the video codec.
Notes
• The camera restarts when the Maximum image size is
changed. It takes about 2 minutes.
• The settings below are changed when the Maximum
image size is changed.
– Camera menu-privacy mask tab: returns to the
factory setting.
– Camera menu-video codec tab: returns to the factory
setting except:
SNC-CH135/CH140/CH180/DH140/DH180
– Image size of image1: to be 1280 × 720 when set
to 1280 × 720, or 1280 × 1024 when set to
1280 × 1024.
– Frame rate of image1: to be 30 fps when set to
1280 × 720, or 20 fps when set to 1280 × 1024.
SNC-CH240/DH240/CH280/DH280
– Image size of image1: 1920 × 1080 (when set to
1920 × 1080), or 1920 × 1440 (when set to
1920 × 1440).
– Frame rate of image1: 30 fps or 25 fps* (when set
to 1920 × 1080), or 20 fps (when set to 1920 ×
1440).
* Depending on the camera operating mode setting.
– Preset position menu: returns to the factory setting.
– Alarm buffer menu: returns to the factory setting.