Specifications - Hitachi DS 14DSAL Handing Instructions

7. If the battery charging fails to complete even when a
specifi ed recharging time has elapsed, immediately stop
further recharging.
8. Do not put or subject the battery to high temperatures or
high pressure such as into a microwave oven, dryer, or
high pressure container.
9. Keep away from fi re immediately when leakage or foul
odor are detected.
10. Do not use in a location where strong static electricity
generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears abnormal
during use, recharging or storage, immediately remove it
from the equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.

SPECIFICATIONS

POWER TOOL
Model
No-load speed (Low/High)
Wood
(Thickness
18 mm)
Drilling
Metal
(Thickness
Capacity
1.6 mm)
Machine
screw
Driving
Wood
screw
Rechargeable battery
Weight
CHARGER
Model UC18YRSL
Charging voltage 14.4 V – 18 V
Weight
8
0 – 300 / 0 – 1500 /min
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1430: Li-ion
14.4 V (3.0 Ah 8 cells)
1.7 kg
UC18YGSL
14.4 V – 18 V
0.6 kg 0.4 kg
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you fi nd rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using the
battery for the fi rst time, do not use and return it to your
supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of lithium
ion battery, the battery may be shorted, causing fi re. When
storing the lithium ion battery, obey surely the rules of
following contents.
○ Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
○ To prevent shorting from occurring, load the battery
in the tool or insert securely the battery cover for
storing until the ventilator is not seen (See Fig. 1).
DS14DSAL
38 mm
Steel: 13 mm
Aluminum: 13 mm
BSL1415X: Li-ion
14.4 V (1.5 Ah 4 cells)
1.4 kg
DS18DSAL
0 – 350 / 0 – 1500 /min
45 mm
6 mm
8 mm (diameter) × 100 mm (length)
(Requires a pilot hole)
BSL1830: Li-ion
18 V (3.0 Ah 10 cells)
1.8 kg
BSL1815X: Li-ion
18 V (1.5 Ah 5 cells)
1.5 kg