Setting The Administrator Password; Creating A User Authentication Key - Yamaha M7CL-32 Service Manual

M7CL-32/M7CL-48

Setting the Administrator password

With the factory settings, the Administrator password is
not set, meaning that anyone can log in with Administrator
privileges and perform all operations. If you want to restrict
the operations of other users, you must specify an
Administrator password.
1
In the function access area, press the SETUP
button to access the SETUP screen.
PASSWORD CHANGE button
2
Press the PASSWORD CHANGE button.
A keyboard window will appear, allowing you to enter
a password.
3
Enter the password in the NEW PASSWORD
field, then enter the same password in the
RE-ENTER PASSWORD field for verification,
and finally press the OK button.
The password can be up to eight characters. If the
two passwords that were entered match, the Admin-
istrator password will be set.
158

Creating a user authentication key

Here's how to create a user authentication key and save it
on a USB storage device. A user authentication key can
be created only by an Administrator or Power User. The
user level can be specified when the authentication key is
created, but the user-defined key settings and preference
settings will be carried over from the user who is currently
logged-in.
1
Connect a USB storage device to the USB
connector.
2
In the function access area, press the SETUP
button to access the SETUP screen.
CREATE USER KEY button
3
Press the CREATE USER KEY button.
The CREATE USER KEY popup window will appear.
q w
t
q USER NAME
Here you can specify or view a user name of up to
eight characters. Press this to access a keyboard
window where you can enter the user name.
e r