Yamaha YSP-2500 Quick Reference Manual

En
Quick Reference Guide
This Quick Reference Guide provides instructions for connecting a TV and BD/DVD player to this device, applying settings, and playing
content. For more information on operations, refer to the "Owner's Manual" in the supplied CD-ROM.
Read the supplied booklet "Safety Brochure" before using this unit. For instructions on how to operate or set the external devices,
refer to the owner's manual supplied with each devices.
Supplied accessories
Before connecting, make sure you have received all of the following items.
Center unit (YSP-CU2500) Wireless subwoofer (NS-WSW120)
STATUS PHONES INTELLIBEAM MIC
Remote control Batteries Optical cable IntelliBeam microphone Cardboard
(AAA, R03, UM-4) (x2) (1.5 m (4.9 ft)) (6 m (19.7 ft)) microphone stand
Owner's Manual Quick Reference Guide (this booklet) Safety Brochure
CD-ROM
Supplied accessories for the optional Wall Mount Bracket SPM-K20
See page 19 in the Owner's Manual.
Spacers (x2) Pads (x3) Screws (M4, 22 mm) (x2) Mounting template
Devices and cables required for connection
• TV • BD/DVD player • HDMI cables (x2)
■
Preparing remote control
Installing the batteries Operation range
Battery × 2 (supplied)
(AAA, R03, UM-4)
STATUS
Press down on the
arrow and slide the
cover in the direction
Within 6 m (20 ft)
in which it points.
Slide the cover back to close it.
© 2014 Yamaha Corporation Printed in Indonesia
Installation Connection
UCABGLHV
Installation
• Install the center unit in the center of the left
Center unit
and right walls.
• Place the center unit on a TV stand in front of
the TV*.
• This unit can be mounted on a wall using the
optional Wall Mount Bracket SPM-K20. See
page 19 in the Owner's Manual.
English
* Use the TV Remote Repeater function if
the center unit obstructs the remote
control sensor on the TV. See "Enabling
TV Remote Repeater function".
• The listening position (such as sofa, etc.)
should be located at the front of the
center unit.
• The distance between the listening
position and the center unit should be
more than 1.8 m (6 ft).
Non-skid pads (8 pcs)
■ ■
Adjusting the height of the center unit
Turn the legs counter-clockwise to increase the height of the If the center unit obstructs the remote control sensor on the TV or signal transmitter for 3D glasses, remove the legs to decrease the
center unit if necessary. Use the arrows ( ) on the bottom of the height of the center unit.
left and right legs, and the scale on the insides of these legs, to The legs consist of components (inner legs) that are fixed to the center unit with screws, and components (outer legs) that can be
confirm that the legs are positioned at the same height. removed by rotating them.
1.
Adjustable range:
22 to 35 mm
(7/8 to 1-3/8 in)
Scale
3.
Store the legs and screws in a safe place out of the reach of children for later use and to prevent children from accidentally swallowing
screws.
ZM27580 [En]
Settings Playback
This unit creates surround effects by reflecting sound beams off the walls of
• To prevent sound reflecting
your listening room. The arrows in the diagrams below indicate the images of
off of walls, angle the
paths of 5-channel sound beams. To achieve desired surround sound effects,
Subwoofer subwoofer slightly toward the
install this unit where there are no objects such as furniture obstructing the
center of the room.
path of sound beams.
• When installing the
subwoofer on a rack, be sure Parallel installation Corner installation
the rack is strong enough to
support the subwoofer and 40° to 50°
that it leaves sufficient space
for heat discharge.
• The subwoofer can also be
placed on its side. See page
18 in the Owner's Manual.
Objects,
such as
furniture
Objects, such as furniture
1 Front left channel 2 Center channel 3 Front right channel
4 Surround left channel 5 Surround right channel
Removing the legs
2.
Remove the outer legs. Remove the inner legs.
Keep turning the outer legs counter-clockwise to remove Use a screwdriver to remove the screws.
them.
Attach the one of the four supplied non-skid pads at each
of the four corners on the bottom of the center unit.
An example of pad positioning is shown in the illustration below.
Note
Installation Connection Settings
Connection
■
Connecting a TV and BD/DVD player
For the cable connection, follow the procedure below. See page 26 in the Owner's Manual when connecting other playback devices such as a game console.
HDMI
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL OUT (ARC) IN1 IN2 IN3
CONNECTOR OUT AUX1
HDMI
SYSTEM SUBWOOFER R L AUX2 TV OPTICAL
CONNECTOR OUT AUX1 OUT (ARC) IN1 IN2 IN3
2 1
1. Remove the cap
BD/DVD player
Use an optical cable when
2. Check the direction of connecting a TV that does not
the plug support Audio Return Channel.
HDMI
OUTPUT
Video signals
OPTICAL
1 2 3
Audio signals OUTPUT
HDMI INPUT
• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.
■ ■
Turning on the unit Enabling TV Remote Repeater function
Plug the power cable of the supplied subwoofer into an AC wall outlet. When When the TV Remote Repeater function is enabled, the unit receives TV remote control signals at the TV remote control
the center unit is turned on, the center unit and subwoofer are automatically sensor (on front) and transmits the signals from the TV Remote Repeater (on rear). This function is useful when you
connected via a wireless connection. cannot operate your TV from the remote control because the remote control sensor of the TV is blocked by the unit.
This function can be used while the TV remote control is using infrared signals.
1.
Plug the subwoofer's
1.
Hold down the REPEATER key on the supplied remote control for more than 3 seconds.
power cable into an AC
wall outlet.
To an AC wall outlet
2.
Press the z key.
STATUS
PHONES INTELLIBEAM MIC
SYSTEM SUBWOOFER
CONNECTOR OUT R AUX1
TX indicator
Connection indicator
Glows
Glows green
Playback
1.
HDMI cable (optional)
Input the digital audio/video signals from the BD/DVD player to this unit.
2.
HDMI cable (optional)
3
Digital video from the BD/DVD player is displayed on the TV.
To an AC wall
3.
To an AC wall outlet
outlet
yTips
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack
with "ARC" indicated) on TV.
• Activate the HDMI control function of this unit so as to activate the Audio Return
TV Channel (ARC). See page 59 in the Owner's Manual.
What is Audio Return Channel (ARC)?
A function transmits digital audio signal output from TV to this unit through an
HDMI cable. By this function, an optical cable to connect TV and this unit is not
needed.
Glows
TV remote control sensor
TV remote control
HDMI
L AUX2 TV OPTICAL OUT (ARC) IN1 IN2 IN3
TV Remote Repeater