Operation Manual; Remote Control - Sharp CD-BP160W Service Manual

CD-BP160W/180W/1500W/1700W
CD-BP160W/180W/1500W/1700W

Remote control

11.
Remote Control Transmitter LED
12.
(CD) Disc Skip Button
13.
(CD) Clear Button
14.
(CD) Memory Button
15.
(CD) Random Button
16.
(TAPE 2) Record Pause Button
17.
(CD) Track Down/Review Button
3
(TUNER) Preset Down Button
3
(TAPE 2) Fast Wind Button
18.
(CD) Pause Button
19.
(CD) Track Up/Cue Button
3
(TUNER) Preset Up Button
3
(TAPE 2) Fast Wind Button
10.
Equalizer Mode Selector Button
11.
(TAPE 2) Reverse Play Button
12.
(CD/TAPE) Stop Button
13.
(CD) Play/Repeat Button
3
(TAPE 1) Play Button
3
(TAPE 2) Forward Play Button
14.
Function Selector Buttons
15.
On/Stand-by Button
16.
Extra Bass Button
17.
Volume Up/Down Buttons
RESETTING THE MICROCOMPUTER
ON/
STAND-BY

OPERATION MANUAL

Reset the microcomputer under the following conditions:
X-BASS/
To erase all of the stored memory contents (clock and timer
DEMO
settings, and tuner and CD presets).
If the display is not correct.
If the operation is not correct.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the
button, hold down the ON/STAND-BY button for at least 1
second.
"CLEAR AL" will appear.
Caution:
The operation explained above will erase all data stored in
memory including clock and timer settings, and tuner and CD
presets.
Remote control
Notes concerning use:
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic.
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
0.2 m - 6 m
Exposing the sensor on the main unit to strong light may in-
(8" - 20')
terfere with operation. Change the lighting or the direction of
the unit.
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
1
3 4 5
6 7 8 9
10 1112 13
14
15
16
button and the X-BASS/DEMO
– 6 –
2
17