Advertisement
Basic adjustment settings
This TV provides various advanced functions for
optimizing the picture quality.
Provides high quality images with minimal dot crawl
and cross color noise.
Preso
MENU
to display the MENU screen,
and then press
~/~
to select "Picture".
Standard
Normal adjustment
Press
./T
to select "Advanced", and then
press
ENTER.
Fast
Slow
For moving images
For still images
Detects, analyzes, converts film
source
On
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
White with Reddish tone
White with Bluish tone
Press
./T
(or
~/~)
to select the desired
parameter.
• See the table for the selectable parameters.
Press
./T
to select a specific adjustment
item, and then press
ENTER.
• You can select "Color Temp.", "Black", "Fine
Motion Advanced", "30-Y IC", "Monochrome",
"Film Mode" or "Range of OPC".
High
Mid-High
Middle
Mid-Low
Low
Press
MENU
to exit.
For a better white balance, use color temperature
correction.
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Off
Normal viewing mode
On
Off
For high detail in black portions
No adjustment
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
+
16 and a minimum of
-16.
Use Fine Motion Advanced to view fast-action video
more clearly.
Max.
Min.
- 15 through
+
16
- 16 through
+
15
Normal image
• Fine Motion Advanced may cause image noise. If this
occurs turn the function "Off".
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
@-27
Advertisement
