Programmable function keys
Your OpenStage 30 T has eight illuminated keys to which you can assign
functions or numbers.
Increase the number of programmable function keys by connecting
a key module
Peter Fox
Destinations?
Depending on how they are programmed, you can use the keys as:
•
Function key
•
Repdial/Direct station selection key
Each key can be programmed with one function.
The configuration of direct station selection keys must be activated
by your service personnel.
Direct station selection keys can be assigned an internal number
from the HiPath 4000 network.
Press the key briefly to activate the programmed function or dial the stored
number.
Your OpenStage is delivered with label strips. Write functions or names in
the white fields on the label strips.
The status of a function is shown by the LED on the corresponding func-
tion key.
Meaning of LED displays on function keys and DSS keys
LED
Meaning of function key
S
Off
The function is deactivated.
T
1
Flashing
Indicates the function status. The line is busy.
R
On
The function is activated.
[1] In this manual, flashing keys are identified by this icon, regardless of the flashing interval.
The flashing interval represents different statuses, which are described in detail in the cor-
responding sections of the manual.
The programmable keys on multi-line phones function as trunk keys
page 94.
Getting to know your OpenStage phone
page 14.
page 63
page 67
Meaning of DSS key
The line is free.
There is a call on the line.
17