Platen Glass - Canon MF229dw User Manual

Platen Glass

Regularly wipe off the dust from the platen glass and the underside of the feeder to prevent smudges to be printed on documents or
printouts.
To display a message for soiling on the platen glass, set <Notify to Clean Original Scanning Area> to <On>.
1
Turn OFF the machine, and unplug the power cord from the AC power outlet.
When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were received by using the
Memory Reception function, faxes that are waiting to be sent, and reports that are automatically printed after sending and
receiving faxes are not deleted.
2
Open the feeder.
3
Clean the platen glass and the underside of the feeder.
Clean the areas with a cloth dampened with water. Then, wipe the area with a soft, dry cloth.
In addition to the platen glass and underside of the feeder, make sure to clean and wipe the white strip of plate (
transparent plastic area (
Caution when cleaning the platen glass
Be careful not to bend the clear sheet (
4
Wait for the cleaned area to dry completely.
5
Gently close the feeder.
6
Reconnect the power cord and turn ON the machine.
Downloaded from ManualsPrinter.com Manuals
) too.
) at the left of the platen glass.
0KCY-0CF
) and the