Troubleshooting; Specifications - Black & Decker BR318 Instruction Manual

TROUBLESHOOTING

Problem Possible Cause
• Unit will not start. • Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
Accessories
Use only 3" x 18" (75 x 457mm) sanding belts. Recommended accessories for use with your
tool are available at extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory for your tool, please call the neaest Authorized
Service Center.
CAUTION: The use of any other accessory not recommended for use with this tool could
be hazardous.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide customers
with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory replacement parts, contact the
Black & Decker location nearest you. To find your local service location, refer to the yellow
pages directory under "Tools—Electric" or call the neaest Authorized Service Center.
BR318 AR
Voltage: 220V
Frequency: 50Hz
Power: 680W
Possible Solution
• Plug tool into a working
outlet.
• Replace circuit fuse.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Reset circuit breaker.
(If the product repeatedly
causes the circuit breaker
to trip, discontinue use
immediately and have it
serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch
replaced at Black &
Decker Service Center or
Authorized Servicer.

Specifications

B2 B2C B3
220V 220V 120V 127V
60Hz 50Hz 60Hz 60Hz
680W 680W 680W 680W
Printed in China
90522243
5/01/07
Rev 0
BR