GE AG_05 – 5,200 BTU Owner's Manual & Installation Instructions page 11

3
Prepare the Window and the Case
Cut the window sash seal to the proper length.
A
Peel off the backing and attach the seal to the
underside of the window sash.
Sash
4
Install the Support Bracket
Open the window and mark the center of
A
the sill.
Center the support bracket, on the mark on the
B
sill, against the stool.
Attach it to the sill with 2 type A screws.
C
Seal
Insert the sliding panels into the guides of the
B
air conditioner and attach them to the case
with 8 type C screws, 4 on each side.
Use type C screws.
Stool
Sill
Inside
Type A screws
Supporting
bracket
Centerline
Outside
Stool
11