D-Link Network Control; The Cable Diagnostic Feature - D-Link DGE-530T Manual

32-bit gigabit network adapter

Hide thumbs Also See for DGE-530T:

Table of Contents

This utility should only be used by experienced network administrators. Additional software or

services may need to be previously installed or configured prior to installation of the SNMP

protocol.

D-Link Network Control

Installed automatically with the driver is the D-Link Network Control program, which may be

opened on the Control Panel of your computer. The configuration and settings information for

this program may be found by clicking the Help button of the current screen. This should provide

you with any information you should need.

Within the D-Link Network Control program is a feature for examining the quality and the

characteristics of a network cable that has been connected to the DGE-530T. This feature, named

the Virtual Cable Tester (VCT), will make it possible for the user to detect and report potential

cabling issues such as cable opens, cable shorts and impedance mismatches. The distance of the

fault can be reported to within one meter.

To view the VCT window, simply double click the icon for the D-Link Network Control and select

the VCT folder heading at the top of the window as seen below.

NOTE: D-Link Network Control is not supported for Windows XP 64 Bit

Edition.

DGE-530T Gigabit Ethernet Adapter Card

Table of Contents