Page 1
RCA Audio Cables (red & white) Power supply Step 1 - Check to make sure the location for your Smile Radio player is: Within 5 feet of your stereo receiver. If not you may need to buy a longer Ethernet cable than what we have included.
Page 2
Step 3 – Connect the RCA audio cables (included) to the red and white jacks on the back of the Smile Radio player to an available audio input on your stereo receiver– just like hooking up a CD player. Any available AUDIO input (with the exception of the Phono input – which won’t work) like CD, MD, Video1, Aux, etc.
Page 3
My player says it is playing music but I don’t hear anything. Using the remote, check the volume on your stereo receiver and the Smile Radio player to make sure no one has turned it down. Check your stereo receiver to make sure that someone didn’t change the music source on it.
Page 4
SMILE RADIO NETWORK TIPS This quick set up guide is designed for locations that have relatively simple DSL/Cable or similar network configurations where computers can obtain Internet connection information through DHCP. If you have a more complex network set up or require that PCs have static IPs or secure Internet...
HOW TO CHANGE CHANNELS Using the remote press the “Favorites” button located towards the bottom of the remote. Scroll Up/Down with the remote to the channel you want to listen to and then hit “Play” Channel Lineup #1 Bright Smile - today’s hits & star artists mixed in with a dash of 80’s tunes for a fun sound that’s consistently upbeat without being overwhelming #2 Lite Smile - soft rock &...