Installing and Setting Up the Nokia IP60
This chapter describes how to properly set up and install your Nokia IP60 appliance in your networking
environment.
Before You Install the Nokia IP60 Appliance
Prior to connecting and setting up your Nokia IP60 appliance for operation, you must do the following:
Check if TCP/IP Protocol is installed on your computer.
Check your computer's TCP/IP settings to make sure it obtains its IP address automatically.
Refer to the relevant section in this guide in accordance with the operating system that runs on your
computer. The sections below will guide you through the TCP/IP setup and installation process.
Chapter 3: Installing and Setting Up the Nokia IP60 Appliance
Chapter 3
Before You Install the Nokia IP60 Appliance
Appliance
39