PC Cards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are keyed to prevent

incorrect insertion. If card orientation is not clear, see the documentation that came with the card.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

To install a PC Card:

1. Hold the card with its orientation symbol pointing into the slot and the top side of the card facing up. The latch may need to be in the "in" position

before you insert the card.

2. Slide the card into the slot until the card is completely seated in its connector.

If you encounter too much resistance, do not force the card. Check the card orientation and try again.

The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the

manufacturer's drivers, use the floppy disk or CD that came with the PC Card.

Back to Contents Page

Table of Contents