Controlling Relays (Only For Hipath 3000); Sensors (Hipath 33X0/35X0 Only) - Siemens HiPath 500 User Manual

More functions/services
Step by Step
*90=Control Relay On?
#90=Control Relay Off?
1
76
Controlling relays
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after
timeout).
Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network)
Select and confirm the option shown,
or
select and confirm the option shown.
4
...
Enter the relay.

Sensors (HiPath 33x0/35x0 only)

If configured (contact your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.
page 87!