Sony AVD-LS10 Operating Instructions Manual page 58

Audio cd/dvd receiver
Hide thumbs Also See for AVD-LS10:
Table of Contents

Advertisement

Custom Settings
The settings for PBC (Playback Control),
Line and Subwoofer can be changed.
1
Follow steps 1 and 2 of "Selection
of initial settings" on page
53continued.
The setup menu is displayed.
2
Press X/x to select "PBC",
"LINE" and "Subwoower".
Disc Audio
Disc Subtitle
Disc Menu
Menu Language
Rating
Area Code
TV Aspect
PBC
LINE
Sub Woofer
Select : V v B b
3
Press c and then press X/x to
select the desired item press
ENTER.
To turn off the SETUP Menu
Press DVD SET UP, RETURN or H
(PLAY).
GB
58
Off
On
Enter :
ENTER
xPBC
Set Playback Control (PBC) to ON or OFF.
On : Video CDs with PBC are played
according to the PBC.
Off : Video CDs with PBC are played the
same way as Audio CDs.
xLINE
Select the method of outputting video
signals from the EURO AV OUTPUT (TO
TV) jack on the rear panel of the receiver.
VIDEO
Outputs video signals.
RGB
Outputs RGB signals.
Note
If your TV does not conform to the RGB signals, no
picture appears on the TV screen even if you select
"RGB." Refer to the instructions supplied with your
TV.
xSUBWOOFER
YES: Select this if the subwoofer is used.
NONE: Select this if no subwoofer is used.
xSpeaker size
User's Speaker Size
Front
Center
Config-1
Small
Small
Config-2
Large
Small
• By default, SUBWOOFER is set to "YES"(Config-
1). All speakers connected with this receiver should
be "Small".
• If you do not use the subwoofer, select "NONE" for
SUBWOOFER(Config-2) and use an all-range
speaker(Large) for Front.
Note
If you connect "Small" for the front speaker and
"NONE" for the subwoofer, the front speaker is
given the bass range that exceeds the capability of the
speaker and the speaker may be damaged.
Setting Item
Rear
SUBWOOWER
Small
YES
Small
NONE

Advertisement

Table of Contents
loading

Table of Contents