Sound; Osd - Haier LCD TV Manual

Basic Operation Instruction
Option
Aspect Ratio Select picture scale
Color Temp Select color temperature mode
of the picture
Noise Reduction Select model of 3D NR

SOUND

Select to enter the SOUND submenu. Press "Up/Down" key on the remote controlor the key
"CH+/CH-" on the control panel to choose what you need.
Press the "Left/Right" key on the remote control or the
"VOL+/VOL-" key on the control panel to adjust analog
value or state (see below table).
Special Attention
1. Normally, 0 value of adjustment is recommended;
2. The treble or bass analog value which is adjusted by
the users will be saved as the User mode by the
machine
Remote Control Shortcut Keys
SMART S: Press SMART S key on the remote control.
You can switch the function among the
MUTE: Open or close sound.
Option
Sound Mode Adjust audio effect mode
Treble Adjust treble value
Bass
Adjust bass value
Balance
Adjust balance of left or right sound
Auto Volume Select Auto Volume

OSD

Select to enter the OSD submenu. Press "Up/Down"
key on the remote control or "CH+/CH-"key on the control
panel to choose what you need. Press the "Left/Right" key
on the remote control or the"VOL+/VOL-" key on the
control panel to adjust analog value or state (see below
table).
Option
OSD Language S elect language for OSD display
OSD Duration Adjust duration of OSD menu
OSD Transparency Adjust halftone of OSD menu
Blue Screen Open or close blue screen
Sleep Time Set sleep time of the machine
Recall Resume to setting of factory
Function
"Standard", "Music", "Movie", "User" four modes.
VOL+/VOL-: Add or reduce volume.
Function
Function
Description
"Full, "4:3", "Subtitle","Film" four modes
There are three Color Temperature modes, "Standard",
"Warm", "Cool ".
"Middle", "High", "Off", "Low".
Sound Mode
Treble
Bass
Balance
Auto Volume
Description
"Standard", "Music", Movie", "User" four modes.
Increasing analog value increases treble;
Decreasing analog value decreases treble (0-100).
Increasing analog value increases bass;
Decreasing analog value decreases bass (0-100).
Increasing analog value decreasing left volume;
Decreasing analog value decreases right volume(L50-R50).
"On/Off", two states.
OSD Language
OSD Duration
OSD Transparency
Blue Screen
Sleep Time
Recall
Description
There are many languages to select
Increasing analog value, extend duration time of OSD menu;
(15, 30, 45, 60). Unit: second
Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).
"On/Off", two states.
"Off, 15M, 30M, 45M, 60M,90M, 120M, 240M", unit: minute.
Reset all values to setting of factory.
11
Standard
Off
Adjust Select Menu:Exit
English
60 Second
0
On
Off
Adjust Select Menu:Exit
50
50
0