Yamaha YSP-300 Owner's Manual page 75

You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI
control-compatible TV (except some models) are connected via HDMI.
• Turning on or off the power (synchronized operation with the TV)
• Selecting the audio output component (TV or this unit)
• Adjusting the volume level (up/down and mute)
An example of the HDMI control-compatible component is a Panasonic EZ Sync (for U.S.A. and Canada) or Viera Link
(for other countries)-compatible component (TV, DVD recorder, Blu-ray recorder, etc.).
_%,._
If you connect this unit to an HDM[ control-compatible DVD player or Blu-ray Disc player via HDM[, you call also control the
connected component ill synchronization with this unit (except some models).
Connect this unit to your HDMI control-compatible TV via HDMI.
For details about HDMI and HDMI components, see "Information on HDMI T_p'on page 20 and "Connections using
HDMI cables" on page 21. Also in the owner's manual supplied with your TV, refer to the information on
connecting an AV amplifier.
2 Turn on the power of all components connected via HDMI.
For details about controlling external components, see the owner's manuals supplied with your components.
Check the system settings for all components connected via HDMI and activate the HDMI control
feature.
For details about setting external components, see the owner's manuals supplied with your components. Once you
have followed steps 1 to 3, you do not need to carry out the same procedure again next time.
4
Turn off the power of your TV and then turn on the power again.
5 Set the input source selector of your TV to this unit (HDMI, etc.).
7
Select the connected component as the input source by pressing INPUT on the front panel of this
unit (or press one of the input selector buttons on the remote control). Confirm that the video
image played back on the DVD recorder (etc.) appears in your TV correctly.
Use the remote control supplied with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
• Check the following if you cannot operate this unit in synchronization with your TV.
- Whether HDM[ CONTROL is set to ON (see page 82).
- Whether the HDM[ control feature is activated for your TV (see the owner's manual supplied with your TV).
• While you are playing back audio from a non-HDM[ component, turning off the power of your TV with the remote control
supplied with your TV does not mrn off the power of this unit. Playback continues without being affected.
71
En