Brother DCP-J4120DW Product Safety Manual page 14

Product Warranty & Liability
Nothing in this guide shall affect any existing product warranty or be construed as granting any
additional product warranty. Failure to follow the safety instructions in this guide may invalidate
your product's warranty.
WARNING
DO NOT allow this product to come into contact with water. This product should not be used
around standing water, including a bath tub, sink, or swimming pool; around appliances
containing water, including a refrigerator; or in a wet basement.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock
from lightning.
DO NOT use this product to report a gas leak in the vicinity of the leak.
Only use the power cord supplied with this product.
CAUTION
This product must be installed near an electrical socket that is easily accessible. In case of an
emergency, you must unplug the power cord from the electrical socket to shut off the power
completely.
Approval Information (MFC models only)
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE
FITTED WITH THE APPROPRIATE CONNECTOR.
Brother advises that this product may not function correctly in a country other than where it was
originally purchased, and does not offer any warranty in the event that this product is used on
public telecommunication lines in another country.
Wiring information (U.K. only)
If you need to replace the fuse in the plug, fit a fuse that is approved by ASTA to BS1362 with the
same rating as the original fuse. Always replace the fuse cover. Never use a plug that does not
have a cover. If in any doubt, call a qualified electrician.
Warning - This product must be earthed.
The wires in the mains lead are coloured in line with the following code:
 Green and Yellow: Earth
 Blue: Neutral
 Brown: Live
14
1
1
1