Installation Of The Mediamaster - Nokia Mediamaster 9602 S Owner's Manual

Installation of the Mediamaster

The box for your Mediamaster should contain the following
items:
• the Mediamaster
• a remote control handset with batteries
• a fully featured SCART cable which can be used to connect
your Mediamaster to the TV or video recorder
• an Owner's Manual for the Mediamaster
About the SCART sockets
• On the back side the Mediamaster is equipped with 3 SCART
sockets (See figure). When you connect external sets to any
of these sockets, always use fully featured SCART Cables.
There are "slimmed" (=cheap) SCART cables on the market,
but it is not so sure that e. g. your Videorecorder will work OK
with some of those cables.
Connecting the Mediamaster to the satellite dish
Installing the satellite dish
• Your satellite dish should be installed with a cable for you to
connect to the Mediamaster. If you do not have this cable you
will need to buy one from a dealer (tell the dealer you need a
coaxial cable and F-connectors).
• Connect the cable from the satellite dish to the socket marked
"LNB"on the back of the Mediamaster.
If you need to fit the F-connectors onto the cable
• Prepare each end of the cable as shown in the diagram. You
will need to fold back the outer braid (as shown).
• Slide the F-connector onto the cable, then turn it clockwise
until it grips the braid.
• Ensure that 3 mm of the core is protruding from the end of the
connector.
GB 4
2 3
1
6
5
4
9
8
7
TV
0
GUIDE
MENU
EXIT
OK
TEXT
SCART cable
Owner's manual
SCART socket
15 mm
8 mm
F-connector
3 mm