Failed Re-Flash Procedure - D-Link DMI-128ESU+ User Manual

software from the correct path. Select Transfer ->> Send Text File. Here give path of the
file (*.ROM). Then click OK to start download. The screen will show the ">>>>>>>>>>" and
"<<<<<<<<<<" alternatively to indicate TA is downloading now.
(7) After finished the download new software, screen will display
"Code update successful"
"OK"
Normally it takes about 10 minutes to finish re-flash.
(8) After you see the message it means the download is completely already. You
need to power off and power on TA again to restart.
Type ATI3 to inspect the new software version.
(9)

8.2 Failed Re-Flash Procedure

Sometimes during the re-flash procedure, due to some accidents like: local power is off; PC is shut
down, RS232 cable is disconnected and etc. To prevent any kind of failed re-flash operation, TA
provides a so-called Minimum Operating Mode. When you failed to re-flash the new software,
TA will detect the failed re-flash internally.
D-LINK ISDN TA DMI-128ESU+
.rom
40