Adjusting The Settings - Sony HT-ST5 Operating Instructions Manual

Adjusting the settings

You can set the following items with the MENU button on the remote control.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1 Press the MENU button on the remote control to display the setting menu on the display of the Bar Speaker.
2 Select the desired setting with the following operation:
 : Select the setting item.
ENTER: Shifts to the lower level menu, or enters the displayed setting.
RETURN: Returns to the upper level menu.
3 Press the MENU button to exit the menu.
Menu
LEVEL
DRC
(Dynamic range control)
AUDIO
SYNC
(AV sync)
DUAL
(Dual mono)
HEQ
(Harmonics equalizer)
AAV
(Advanced auto volume)
Function
You can enjoy Dolby Digital sound at low sound volumes. (ON/
AUTO/OFF)
ON: Compresses sound in accordance with the compression
information contained in the content.
AUTO: Automatically compresses sound encoded in Dolby TrueHD.
OFF: Sound is not compressed.
You can adjust the sound when the image and the sound are not
in sync. (1-4/OFF)
You can enjoy multiplex broadcast sound of Dolby Digital audio.
(M/S /MAIN/SUB)
M/S: Main and sub channels
MAIN: Main channel
SUB: Sub channel
Reproduces the very low volume sounds. (ON/OFF)
Note: The HEQ function only works when the SOUND FIELD setting
is set to "MUSIC" and either "ANALOG" or "BT AU" is selected
as the input.
This does not function with any other inputs, even though the
item may be displayed on the front panel.
Reduces the volume discrepancies between different programs or
between programs and commercials. (ON/OFF)
Note: When the SOUND FIELD setting is set to "FOOTBALL," "AAV
(Advanced auto volume)" may not work.
Default
AUTO
OFF
MAIN
ON
OFF
continued
15
US