Cisco SPA 525G2 Administration Manual page 25

Getting Started
Using the Web-Based Configuration Utility
STEP 1
STEP 2
STEP 3
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
To access the IP phone configuration utility:
Launch a web browser on a computer that can reach the phone on the network.
Direct the browser to the IP address of the phone. To determine the IP address:
• Cisco SPA 301: Press the asterisk (*) button four times. In the IVR menu,
enter 110, then press #. The IP address is recited.
• Cisco SPA 501G: Press the Setup button. In the IVR menu, enter 110, then
press #. The IP address is recited.
• Cisco SPA 303, Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G, Cisco
SPA 509G: Press the Setup button, then select Network. The
field shows the phone's current IP address.
• WIP310: In the Home screen, press Options and highlight
the Select button.
• Cisco SPA 525G/525G2: Press the Setup button, then select Status. Select
Network Status
Enter the IP address in your web browser address bar. For example:
http://192.168.1.8
If your service provider disabled access to the configuration utility, you must
contact the service provider.
If you have trouble accessing the configuration utility, perform the following steps:
Cisco SPA 303, Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G,
Cisco SPA 509G
Press the Setup button on the phone.
Select Network.
Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the
Edit soft key and press y/n soft key to set it to Yes.
Press OK, then press Save.
. The IP address is displayed.
1
Current IP
Phone Info
. Press
13