Building In Delays - Silvercrest URC 101 DT Operation And Safety Notes

Building in delays

It can be useful to build in a time delay before a
command step is carried out e.g. to allow for the TV to
warm up. The standard delay between the infra red
signals is half a second.
More delays can be programmed in one after the other to
achieve a waiting time of greater than nine seconds.
Choosing a device also requires one storage space.
Channels with double digits also require two storage
spaces.
When entering the steps (as described above) where
the time delay should be built in, press the PAUSE
button (9)
Press the number button (3) that corresponds with the
number of seconds time delay that you want to build in
(e.g. "3" for 3 seconds time delay). The maximum time
delay is 9 seconds.
. The question appears.
57