Power Head - Hitachi PV-XA100 Instruction Manual

In the event of an abnormality or malfunction, stop using it use immediately.
• The cleaner does not operate even after pressing the control button.
• The power turns on and off when moving the plug or cord.
• The cleaner does not operate even after switching to "High" or "Standard".
• There is an abnormal sound during operation.
• The body is deformed or abnormally hot.
• The cord is damaged or abnormally hot.
• There is a burning "smell".
• There are other abnormalities.
There is a risk of fuming, fire, or electric shock. Immediately request for inspection
and repair by the Hitachi authorized service agent.
Socket, plug, cord, charging station
l Use AC 220-240V socket.
l Periodically wipe off dust, etc. from the plug with a dry cloth.
l Make sure to fully insert the plug.
l Disconnect the plug from the socket when performing charging station maintenance.
If the cord is damaged, it must only be replaced by the Hitachi authorized service agent in
order to avoid a hazard.
l Do not damage the cord.
[Do not damage, tamper, unreasonably bend, pull, twist, tuck, or place heavy objects on the
cord, etc.]
l Do not use damaged cords and plugs, or loose socket.
l Do not let the cord get caught in the rotating rotary brush.
l Do not insert or disconnect with wet hands.
l Do not charge using a combination other than the included charging station and
stick cleaner.
l Do not use the included charging station to charge other types of rechargeable
batteries or non-rechargeable batteries.
l During charging, the stick cleaner with the charging station must be placed in a well
ventilated area.
Doing so may cause fire or electrical shock.

Power head

l Do not touch the rotating rotary brush or safety
switch.
This may cause injury. Be careful especially for children.
l Do not place the power head on parts of your body (on
top of your feet, etc.) when pulling the power head.
This may cause injury.
WARNING
Do not touch.
Safety switch
Rotating rotary
brush
E-5