Optimizing Image Performance (Analog Input) - HP LCD Monitor Reference Manual

5. Adjust the item using the
6. After adjusting the function, select Save and Return, or Cancel if you don't want to save the
setting, then select Exit from the Main Menu.
NOTE: If the buttons remain untouched for 10 seconds while displaying a menu, the OSD
automatically saves all changes and exits.
The following table lists the OSD Main menu items with a brief descriptions of each item.
Table 3-1 OSD Main Menu
Icon Main Menu
Brightness
Contrast
Color
Image Control
OSD Control
Management
Language
Information
Factory Reset
Source Control
Exit

Optimizing Image Performance (Analog Input)

Two controls in the on-screen display can be adjusted to improve image performance: Clock and
Clock Phase.
NOTE: The Clock and Clock Phase controls are adjustable only when using an analog (VGA) input.
These controls are not adjustable for digital inputs.
The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock
setting. Use these controls only when the auto-adjustment function does not provide a satisfactory
image.
●
Clock—Increases/decreases the value to minimize any vertical bars or stripes visible on the
screen background.
●
Clock Phase—Increases/decreases the value to minimize video flickering or blurring.
8 Chapter 3 Operating the Monitor
+ or – buttons on the front panel to adjust the scale.
Description
Adjusts the brightness level of the screen. The factory default range is 90.
Adjusts the contrast level of the screen. The factory default range is 80.
Selects and adjusts the screen color.
Adjusts the screen image. (This menu is only available when using VGA input.)
Adjusts the on-screen display (OSD) controls.
Selects the power management, audio, and timer features of the monitor.
Selects the language in which the OSD menu is displayed. The factory default is English.
Selects and displays important information about the monitor.
Returns all OSD menu settings and DDC/CI controls to the factory default settings, except the
Language.
Selects the video input signal. (This menu is only available for models with more than one input.)
Exits the OSD menu screen.
ENWW