Host Affinity Settings - Fujitsu ETERNUS DX200F Setup Manual

Host Affinity Settings

8
The host affinity settings ensure security when multiple servers are connected by assigning the host interface ports
that the hosts (servers) can access and the volumes that the hosts (servers) can recognize.
Follow the procedure below to set host affinity by associating a host group, a CA port group and a LUN group.
1.
Host group addition
Add the information on the hosts (servers) that access
the ETERNUS DX.
To display the screen to add the host groups (example
for iSCSI host groups):
Click [Add iSCSI Host Group] in [Action] under
[Host Group] in [Category] on the [Connectivity] tab.
2.
Port parameter settings
Set the connection information between the host
interface port and the server.
To display the screen to set the port parameters
(example for iSCSI Port):
Click [iSCSI] under [Port Group] in [Category] on the
[Connectivity] tab. Select the checkbox for the iSCSI
port to set the port parameters for on the
[iSCSI Port Group] screen and then click
[Modify iSCSI Port Parameters] in [Action].
3.
Port group creation
Create a port group for a host to access the ETERNUS
DX.
To display the screen to create a port group (example
for iSCSI Port):
Click [Create iSCSI Port Group] in [Action] under
[Port Group] in [Category] on the [Connectivity] tab.
4.
LUN group addition
Add a group of volumes that can be recognized by the
host (LUN group).
To display the screen to add a LUN group:
Click [Add LUN Group] in [Action] under [LUN Group]
in [Category] on the [Connectivity] tab.
FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide
7
Copyright 2014 FUJITSU LIMITED
P3AM-8482-01ENZ0