Product Specifications - GE MapSight User Manual

Use the serial cable to connect your device to the desktop computer. Follow the ActiveSync
wizard instructions.
If your firewall application brings up a warning message asking whether you want to allow a
connection, check the option to allow the connection and click
Note: If the warning message above does not appear when you try to connect to the
desktop computer but the device is still being dropped, contact your service center.
Issue 6: Your MapSight locks up.
Solution: To reset the device, press and hold the Power button for 10 seconds or until the screen
goes dark. The device turns on again after a few seconds.
Issue 7: Captured data is not writing to the fitted SD Card.
Solution: Check the MapSight Data settings (refer section
the Current Data Folder: is pointing to the \SD Card\
Note: The required folder on the SD Card must be created (via File Explorer) before the
[Save] button is used to set the Data Folder.

Product Specifications

Full specifications of the individual instruments are available at
Basic specifications are as follows:
Model
Laser Range (m)
Camera Resolution (MP)
MapSight U ser M anual
MS-101-14-12-34.0
Settings – Data
MapSight
300
5
Page 8 2
" "
Yes .
Folder) to ensure that
http://www.gemapsight.com/
www.gemapsight.com/support