Table of Contents
Advertisement
Connections
• For details on installation and connections, be sure to contact your supplier.
• Connect the red (BATT) and white (SIGNAL) wires of the power cable via a fuse
(5 A – 15 A).
(The power cable is included in the separately sold Cable Kit.)
• Connect the power cable from the passenger compartment fuse box.
Use a separately sold automotive cable to provide power from the engine
compartment to operate the recorder in the passenger compartment.
• Connect the power cable when all connections are completed. Be sure to
read the instructions in the connector diagram on page 41 and the operating
instructions of the devices that will be connected.
• Verify that recording is not in progress prior to disconnecting any cables from the
recorder.
Be sure to disconnect the power cable first, and then disconnect any other cables.
• An incorrectly connected power cable could cause a fire or damage. Be sure to
connect the power cable correctly.
14
Advertisement
Table of Contents
