Environ 3 Infrared Remote Transmitter Operation Guide PREFACE About this Guide This document provides operating instructions for the following Environ 3 products: • 61205A Environ 3 Infrared Remote Transmitter Additional Manuals The complete library of Environ 3 Preset Dimming Product manuals may be downloaded at www.strandlighting.com.
Environ 3 Infrared Remote Transmitter Operation Guide PRODUCT OVERVIEW Infrared Remote Transmitter Overview The Environ 3 Infrared Remote is used to remotely control Environ 3 Control Stations over an unobstructed range of approximately 75 feet. 5-Preset Environ 3 stations have an integrated infrared (IR) receiver that allows them to receive IR commands from the Infrared Remote.
Environ 3 Infrared Remote Transmitter Operation Guide OPERATION Enabling Keypads to Receive IR Signals A wall keypad must be enabled in order to receive the IR signal from the IR Remote. To enable the keypad, do the following: Step 1. At keypad, press and hold A and D buttons for 3 seconds.
Page 6
Environ 3 Infrared Remote Transmitter Operation Guide This system is based on line-of-sight operations, therefore, the receiver must be able to "see" the transmitter. Any obstruction between the transmitter and receiver may adversely affect per- formance of the unit. Figure 2: IR Remote Line-of-Sight...
Page 7
Environ 3 Infrared Remote Transmitter Operation Guide NOTES...